Bronze bangle

Бронзовый браслет
Бронзовый браслетБронзовый браслетБронзовый браслетБронзовый браслетБронзовый браслетБронзовый браслетБронзовый браслет
We represent a master class of a bronze bangle from a wire and CrystalArt beads.

You will need:

- flat relief wire of copper color 7715, color No. 2, 1kh5mm;
- copper wire of bronze color WIRE26G-05, diameter 0,4mm;
- Crystal Art beads 12012/029ABC;
- Crystal Art beads 12017/043ABC;
- nippers;
- round pliers.

Work processing:

Take 2 pieces of a flat relief wire 30 cm long. On the one hand  bend the ends in the form of ringlets by means of round pliers. Take a piece of a thin copper wire 50 cm long. Connect the ends of a flat wire with the end of thin wire piece (fig. 1).

String 1 square, 1 rectangular and 1 square beads on a thin wire. Place them between pieces of a flat wire. Connect the ends of a flat wire under beads and wind with a thin wire (fig. 2).

Continue weaving in the same way (fig. 3). Make 4 elements.

Bend the chain in the form of a bangle. At this stage the flat wire will be unfold and will beautifully wind round beads (fig. 4).

Cut off the excess ends of a wire (fig. 5).

Bend the ends of a wire by means of round pliers (fig. 6).

Address:
specify to the manager
Telephone:
specify to the manager
Lessons’ schedule