Necklace - Fuchsia

Ожерелье Фуксия
Ожерелье ФуксияОжерелье ФуксияОжерелье ФуксияОжерелье ФуксияОжерелье ФуксияОжерелье ФуксияОжерелье ФуксияОжерелье ФуксияОжерелье Фуксия
We represent to your attention a master class of a charming necklace "Fuchsia".

You will need:

- CrystalArt beads 13005/015ABC, Table Cut Ab;
- Preciosa Ornela beads No. 323;
- Preciosa Ornela beads No. 240;
- flat relief decorative wire;
- monothread;
- thick scaffold;
- fastener;
- round pliers;
- flat-nose pliers;
- stoppers.

Work processing:

Take 9 pieces of a flat relief wire 20 cm long. Twirl a half piece of a wire in a spiral by means of tool for turning of a wire, then twirl the second half piece of a wire to other side. Thus, you will have the S-shaped spiral. Make 9 spirals (fig. 1).

Take 16 pieces approximately 3 cm long and connect spirals among themselves with their help (fig. 1,2). Densely bend the ends of clamps on the back side end-to-end.

Weave 3 medallions according to the pattern (fig. 3) and fix them on a basis of a wire with accurate stitches of a monothread or by means of glue (fig. 4).

Attach to a basis of a wire a piece of a thick scaffold and string Preciosa beads and CrystalArt beads. Attach to the next crimp the second same piece of a scaffold and string Preciosa beads and CrystalArt bead (fig. 5).

String a rectangular bead on both ends of a scaffold and fasten a knot to fix beads. Further string a number of beads on both ends of a scaffold. The length of a row depends on the desirable length of a necklace. 

Then string the stopper, the fastener and pass a scaffold in the opposite direction through the stopper. Tighten them and clamp the stopper by round pliers. Pass a scaffold through beads and cut it off (fig. 6).

Repeat the same operations on the other side of a necklace.

Address:
specify to the manager
Telephone:
specify to the manager
Lessons’ schedule