Bangle of a green wire

Браслет из зеленой проволоки
Браслет из зеленой проволокиБраслет из зеленой проволокиБраслет из зеленой проволокиБраслет из зеленой проволокиБраслет из зеленой проволокиБраслет из зеленой проволокиБраслет из зеленой проволокиБраслет из зеленой проволоки
We represent to your attention a master class of a bangle with wire and beads.

You will need:

- green round wire 7705, color 24, diameter 3mm;
- lime round wire 7701, color 18, diameter 1mm;
- lime flat wire 7714, color 18, 1mm x 5 mm;
- Crystal Art beads 12017/043ABC,6MM;
- round pliers;
- nippers.

Work processing: 


Take 2 pieces of a thick green wire which length is 25 cm and 1 piece of a thin lime wire with length 1m. Put 2 pieces of a green wire together and fix the end of a lime wire several winds at a range about 5-6 cm from the edge. String 1 bead (fig. 1).

Make some winds around other piece of a wire and string once again a bead (fig. 2).

Continue weaving, gradually forming a bangle (fig. 3).

Fix a lime wire several winds without reaching 5-6 cm of edge (fig. 4).

Bend the free ends of a thick green wire by round pliers (fig. 5).

Take a piece of a flat lime wire 50 cm long and fix its end in a place where weaving is ended. Now stack the long end of a flat wire on a spiral, overwinding a wire (fig. 6).

Continue stacking wire winds around until you reach the desirable diameter. Bend the end of a wire on the back side (fig. 7).

To put on a bangle it is enough to move it slightly apart and then to shift on a brush.

Address:
specify to the manager
Telephone:
specify to the manager
Lessons’ schedule